Ramsey Electronics SG560 Guía de usuario descargar pdf (Pagina 21)

BASIC OPERATION

2.06.04 Generating DCS

To activate DCS, press

The LED will light indicating it is on. The DCS code field is now active as indicated by the

blinking icon.

You must enter the DCS code with the UP / DOWN keys. You will be selecting from an

internal list stored in the COM3010. To select a code of 53, use the

keys to select the code.

For inverted digital code, press SHIFT, DCS; press them again to return to normal. Note the

“N” or “I” on the end of the code. To invert or de-invert the DCS code, press SHIFT, DCS to

toggle the code.

For example: If you had 53N selected for a code, pressing

will select 53I.

To enter a new deviation value for DCS code generation, press FM followed by the deviation

level desired, followed by Hz/uV.

Example: (For 500Hz deviation)

To turn off DCS, press

GENERATE TX Level

Modulation Seq/Reg

Your Notes:

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 103 104

Sin comentarios

Ramsey Electronics SG560 Guía de usuario Pagina 21