Ramsey Electronics AR2 Manual de usuario descargar pdf (Pagina 15)

AR2 • 15

4. Set the port settings as follows:

Bits Per Second Same As UP24B

Data Bits 8

Parity None

Stop Bits 1

Flow Control None

5. Click on “OK”.

6. Use the Following Commands to access your UP24B.

If you use our custom software for this, please see the software’s documenta-

tion for more information.

If you wish to program your own software or use terminal software to commu-

nicate with the UP24B, these are the commands currently supported:

Note all commands are in uppercase, and spaces must be included. All com-

mands must be finished with a carriage return (<CR>), or /r for the UP24B to

recognize it as a command. When you press “Enter” in the terminal software

this will be appended for you. At the end of a command the UP24B will send

back a Carriage Return Line Feed (<CR><LF>) for proper terminal display.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

Sin comentarios

Ramsey Electronics AR2 Manual de usuario Pagina 15